Dometic TEC Serie Instructions De Montage Et De Service page 20

CONNECTION TO THE POWER SUPPLY
Important
The connection must be carried out by
GB
a qualifi ed, authorised technician, in
compliance with current laws and using
appropriate, prescribed materials.
Warning - Caution
Before carrying out any operation, turn
the main power supply off.
Proceed as indicated.
1 -Open the door (E).
2 -Unfasten the screws to
dismantle the casing (F).
3 -Use cables of the correct
diameter (see "Table of
Cable Sections").
4 -Connect the cable to
terminals
live and earth) on the
panelboard.
5 -Connect
powering
panel to the socket (L).
6 -Connect the battery as
indicated in the following
paragraphs.
7 -Replace the casing (F)
and fasten the screws.
8 -Close the door (E) when
the operation has been
completed.
(G) (230V
(H)
cable
the control
intake (L)
cable (H)
Important
Only connect the battery after having
made all the electrical connections.
230V (POWER 12V
CABLES) (BATTERY
CHARGER)
4 mm 2.5 mm
2
casing (F)
door (E)
terminals (G)
- battery
terminals
- -
20
Table of Cable Sections
LENGTH UP TO 6 LENGTH OVER 6 M
M (BATTERY (BATTERY
CONNECTION) CONNECTION)
16 mm 25 mm
2 2
fuel reserve indicator
battery charger
+ battery
(G)
User Manual
2