Dometic TEC Serie Instructions De Montage Et De Service page 13

- Replace worn components with original
spare parts. Use the oils and greases in-
dicated in the manual. All this will ensure
that the machine retains the functions and
RULES FOR SAFETY FROM ENVIRONMENTAL IMPACT
Each organisation has the job of applying
certain procedures to identify, evaluate and
control the influence that its own activities
(products, services, etc.) have on the
environment.
The procedures to be followed to identify
significant impacts on the environment must
take the following factors into account:
- Emissions into the atmosphere
- Discharge of liquids
- Waste management
- Contamination of the ground
- Use of raw materials and natural
resources
- Local problems relating to environmental
impact
In order to minimise environmental impact,
the manufacturer provides, below, a series of
indications that should be taken into account
by all those who, for whatever reason,
work with the appliance during its expected
working life.
- All packaging components must be
SAFETY FOR THE DISPOSAL OF WASTE FROM ELECTRICAL
AND ELECTRONIC EQUIPMENT (WEEE DIRECTIVE 2002/96)
- Waste from Electrical and Electronic
Equipment may contain dangerous
substances that are potentially harmful
for the environment and for public
health. They must always be disposed
of properly.
- When decommissioning, select all the
components according to their chemical
characteristics and dispose of them
according to type, in compliance with
current laws.
- With reference
directive (Waste from Electrical and
Electronic Equipment), the user, when
decommissioning, must separate the
to the WEEE
- -
13
safety levels foreseen.
- Do not discard pollutants into the environ-
ment. They must be disposed of accord-
ing to current laws.
disposed of according to current laws in
force in the country in which said disposal
takes place.
- During installation, ensure that the
location is suitably ventilated, so as to
avoid any concentration of air that might
be unhealthy for operators.
- During use and maintenance, do not
disperse pollutants into the environment
(oils, greases, etc.) and make sure they
are disposed of separately according to
the composition of the various materials
and in compliance with current laws in
that regard. Electrical and electronic
components should be disposed of as
special waste.
- Keep noise levels down to reduce noise
pollution.
- When decommissioning, select all the
components according to their chemical
characteristics and dispose of them
according to type.
electrical and electronic components and
dispose of them in special authorised
collection centres, or return them, still
installed, to the dealer on making a new
purchase.
- All the components that must be
removed and disposed of separately are
marked by a special indication.
- Unlawful disposal
Electronic and Electrical Equipment
(WEEE) is punishable under the laws
in force in the country in which any
infringement is found.
of Waste from
User Manual
GB