Dometic TEC Serie Instructions De Montage Et De Service page 12

- It is necessary to ensure that the installation
area has been provided with all the suction,
power supply and drainage connections
required.
- During installation, respect the perimeter
GB
areas indicated by the manufacturer, also
bearing in mind all the other operations in
the surrounding areas. This requirement
must be implemented in such a way as to
comply with current laws on safety at work.
RULES FOR OPERATION AND USE
- As well as being suitably trained and
informed regarding use of the unit, the
operator must have the abilities and
knowledge required for the type of work
to be carried out.
- Even after adequate documentation,
simulate a few test operations on first
use, if necessary, so as to identify the
various controla and their main functions,
in particular those relating to start-up and
stoppage.
- Only use the unit for the purposes
foreseen by the manufacturer. Improper
use of the unit may result in risks for
the health and safety of persons, and in
damage to property.
RULES FOR ADJUSTMENT AND MAINTENANCE
- Keep the appliance in a state of maximum
efficiency, by carrying out the planned
maintenance operations foreseen by
the manufacturer. If these are properly
carried out, they will ensure the appliance
provides optimum performance, a longer
working life and constant compliance with
the safety requirements.
- Before carrying out any maintenance
or adjustments, activate all the safety
devices provided and evaluate the need
to inform the persons working on the
machine and any persons in the vicinity. In
particular, make sure that the surrounding
areas are adequately marked and prevent
access to any of the devices that might, if
active, result in unexpected dangers and
risks to the health and safety of persons.
- Installation and connection must be carried
out according to the manufacturer's
instructions.
must also take into account all legal
requirements and rules, and must carry out
all installation and connection operations in
a workmanlike manner. When installation
has been completed, before use, he must
carry out a general check to ensure these
requirements have been met.
- The appliance has been designed and
built to satisfy all the working conditions
indicated by the manufacturer. Tampering
with any of the devices in order to achieve
performance levels other than the ones
foreseen may result in risks for the health
and safety of persons, and in damage to
property.
- Do not use the unit if the safety devices
are not properly installed and operating
correctly. Failure to comply with this
requirement may result in severe risks for
the health and safety of persons.
- Maintenance and adjustment operations
must only be carried out by persons
authorised to do so, who must ensure that
all the necessary safety precautions are
taken and that the procedures indicated
here are complied with.
- All maintenance
require specific technical knowledge
or special abilities must only be carried
out by qualified technicians, who have
esperience in the specific sector of
operation.
- To carry out maintenance operations in
areas that are not easily accessible or
dangerouse, ensure that suitable safety
precautions are taken for yourselves and
others, in full compliance with current
laws on safety at work.
- -
12
The person in charge
operations
User Manual
that