Dometic TEC Serie Instructions De Montage Et De Service page 19

Proceed as indicated.
1. -Identify the exact
position using the
boring template (A),
supplied in the pack,
and drill the holes.
2. -Insert the plugs (B)
provided.
3. -Position the unit in
the set area.
4. -Fix the unit
the floor using
appropriate screws
(B).
5. -Identify the exact
position and,
necessary, trace the
coordinates so as to
position the control
panel properly (C)
(see figure).
6. -Fix the control
panel (C) using the
screws (D) provided.
to
if
- -
19
screw (C)
block (B)
drilling
template (A)
control panel (C)
screw (D)
User Manual
GB