Cardin FM S508 Mode D'emploi page 11

Use
The S508 radio control allows the remote activation of electrical and electronic appliances with its best use
in the following areas: automatic opening systems, alarm systems, and in all systems which require remote
control activation (without wires) using secret codes.
Transmitter versions
TXQ508C2
TXQ508C4
TXQPRO508C4
TXQPRO508C4A
Receiver versions
RQM508C2
RSQ508C2
RCQ508C1
Memory module (M1)
The module is furnished with a non-volatile EEPROM type memory and contains the transmitter codes and
allowsyoutomemoriseupto1000codes.Theprogrammedcodesremainstoredevenintheabsenceofpower.
PREPARING THE SYSTEM
Toobtainthebestresultsfromtheradiocontrolsysyemtheaerialinstallationsiteshouldbecarefully
chosen. 'Range' is intended to mean the working distance, measured in free space, between the
receiver and the transmitter with the aerial installed.
The range is therefore closely linked to the technical characteristics of the system and varies
according to the characteristics of the site in which the system is located. For best performance
we advise you to use the Cardin ANQ800-1 aerial. Wire the aerial to the receiver using a coaxial
cable RG58 (impedance 50Ω) with a maximum length of 15 m.
Miniaturized transmitters
Miniaturized transmitters
Industrial transmitters
Industrial transmitters + external aerial
Mini receiver
Slot-in receiver card
Outdoor receiver
11
2 Buttons
4 Buttons
4 Buttons
4 Buttons
2 Channels
2 Channels
4 Channels