Adjusting setup items — SET
1
Press and hold the control dial.
The setup display appears.
2
Rotate the control dial until the
desired menu item appears, then
press it.
3
Rotate the control dial to select the
setting, then press it.
The setting is complete.
4
Press
(BACK).
The display returns to normal play/reception
mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
Setup
Clock Adjust (page 6)
Beep
Activates the beep sound: "on," "off."
RM (Rotary Commander)
Changes the operative direction of the rotary
commander controls.
– "NORM": to use the rotary commander in the
factory-set position.
– "REV": when you mount the rotary
commander on the right side of the steering
column.
AUX Audio*
1
Activates the AUX source display: "on," "off"
(page 20).
Auto Off
Shuts off automatically after a desired time
when the unit is turned off: "NO," "30sec
(seconds)," "30min (minutes)," "60min
(minutes)."
Display
Demo (Demonstration)
Activates the demonstration: "on," "off."
Image
Sets various display images.
– "All": to display all images.
– "Movie": to display a movie.
– "SA 1 – 3, All": to display the Spectrum
Analyzer.
– "Wall.P 1 – 3, All": to display a wallpaper.
– "off": to not display any image.
Information
Display the items (depending on the source,
etc): "on," "off."
Dimmer
Changes the display brightness.
– "Auto": to dim the display automatically when
you turn lights on. (Available only when the
illumination control lead is connected.)
– "on": to dim the display.
– "off": deactivate the dimmer.
Illumination
Changes the illumination color: "Blue," "Red,"
"Green."
Auto Scroll
Scrolls long items automatically: "on," "off."
Play Mode
Local (Local Seek Mode)
– "on": to only tune into stations with stronger
signals.
– "off": to tune normal reception.
Mono*
2
(Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: "on," "off."
IF
– "Auto": to narrow automatically the reception
frequency to eliminate noise.
– "Wide"*
3
: to always hear FM stereo
broadcasts in stereo and with full the
frequency signal reception.
Zappin Time*
4
Selects the playback time for the ZAPPIN
function.
– "1 (about 6 seconds)," "2 (about 9 seconds),"
"3 (about 30 seconds)."
BTM (page 11)
*1 When the unit is turned off.
*2 When FM is received.
*3 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.
*4 When CD/USB/iPod source is activated.
19