Publicité
Les langues disponibles
Les langues disponibles
Replacing Oven Light Bulb
Warning
To avoid electrical shock which can cause severe
personal injury or death, unplug power cord or open
circuit breaker to oven before replacing light bulb.
After replacing light bulb, restore power.
Caution
To avoid personal injury or property damage, observe
the following:
1. Allow oven and light bulb to cool.
2. Wear gloves when replacing light bulb.
Tools Needed
•
Protective gloves
•
Phillips screwdriver
• 40-watt, 230volt (Rated 250v) appliance bulb.
(available from authorized distributor or servicer)
1. Remove screw from access cover on top left
wall of oven exterior. Remove access cover.
2. Remove old bulb and replace with new bulb.
3. Replace access cover and screw by reversing
procedure in step 1.
To remove bulb,
turn in direction
shown.
Service Codes
During operation, oven display may show the following
service codes:
SERVICE
1
SERVICE
2
SERVICE
3
SERVICE
4
SERVICE
4P
SERVICE
5
SERVICE
6
SERVICE
7
SERVICE
8
HOT
PLEASE WAIT
Important
Contact an authorized servicer if oven display shows any
code. Service must be performed before using
equipment.
* If display shows "HOT PLEASE WAIT" equipment
is overheated. Equipment automatically interrupts
cooking sequence and turns on cooling fan until
normal temperature is reached. When oven cools
to normal temperature, oven resumes normal
operation.
20
Publicité
