ANSMANN BASIC 4PLUS Manuel D'utilisation page 2

GB
OPERATING INSTRUCTIONS
Please read the operating instructions before use!
USE OF THE CHARGER
Plug-in charger for 1-4 NiCd/NiMH batteries of sizes Micro (AAA); Mignon
(AA) and 1 9 V block.
ATTENTION
Use only with NiCD/NiMH cells. Non rechargeable batteries or other
types could cause an explosion! • Do not attempt to charge Alkaline
batteries or other types of primary batteries • Do not dispose of batteries
in fire as the battery may explode, leak or catch fire
FEATURES
Separate charging process for each inserted cell • NiCD as well as NIMH can
be charged at the same time • charging indicators for cylindrical cells and 9 V
blocks • reverse connect protection • auto matching to charging current
DISPLAY FOR CYLINDRICAL CELLS (1):
Green LED constant: Charging for cylindrical cells
DISPLAY FOR 9V BLOCK (2):
Red LED constant: charging for 9V
SAFETY INSTRUCTIONS:
Keep the charger in a dry place (indoor or in-vehicle use only) • In
order to avoid the risk of fire and / or electrical shock, the charger must
be protected against high humidity and water • Ensure that the ventilation
slots are kept free, to guarantee perfect function of the unit and avoid
over-heating • Do not plug in the charger if there are any signs of damage
to the housing, cables or plugs • Do not open or reconstruct the charger
or any adaptors • In the case of a defect, please return to an authorized
service centre • Keep out of reach of children • Disconnect the device from
the mains after use • To clean the device please disconnect from the mains
and use only a dry cloth
OPERATION
Plug in the charger to the mains. The charger starts automatically when
one or more cells are inserted into the charging slots. Pull back the