ANSMANN BASIC 4PLUS Manuel D'utilisation page 3

contact bridge (5) and insert the cells to the bottom of the charging slot.
Always connect the cells in the right direction for polarity (according to
the symbols in the charging slots). The cells do not have to be inserted
simultaneously as the charging processes are separate from each other.
To prevent the cylindrical cells and the 9 V block from overcharging please
only charge empty cells. Please note the charging times in the table
(6). The maximum charging time for empty cells can be calculated with
following formula:
1.4 (charging factor) x capacity (mAh)
charging time (h) =
charge current (mA)
Example:
Mignon AA 2000 mAh
charging current for AA cells: 150 mA
1.4 x 2000 mAh
= charing time: approx 18,5h
150 mA
MAINTENANCE AND CLEANING:
To clean the charger, disconnect it from the power adaptor. To ensure
correct function of the charger keep the charging contacts free from dust
and dirt. Please only use a dry cloth.
ENVIRONMENT:
Rechargeable batteries are not to be disposed of in domestic waste. Used
batteries should be turned into a battery recycling collection depot. Check
with your local municipal office.
TECHNICAL DATA:
Charging current: Micro AAA: 50 mA; Mignon AA: 150 mA; 9V: 15 mA