Ego Power+ ST1500-FC Guide D'utilisation page 23

8. Place the ends of the line in two
opposite notches in the spool,
with approximately 6 in. (15 cm)
protruding (Fig. 18).
9. Align the notches of the spool from
which the lines protrude with the
eyelets in the spool retainer and
position the spool in the retainer
(Fig. 19).
10. Holding the spool and spool retainer, grasp one end of the line and pull it to
release the line from the notch in the eyelet (Fig. 20). Repeat with the other end.
20
56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER
18
6" (15 cm)
19
Notch
Eyelet
Notch
Eyelet
23