Ego Power+ ST1500-FC Guide D'utilisation page 10

PACKING LIST
PART NAME
String trimmer
Guard
Front-assist handle assembly
Hex wrench
Bolts for locking shaft (ST1500-S/ST1500-S-FC Only)
Operator's manual
UNFOLDING THE SHAFT (ONLY FOR ST1500-S/ST1500-S-FC)
WARNING:
shaft at the joints.
WARNING:
WARNING:
battery pack from the product when
you are assembling parts, making
adjustments, cleaning, or when the
product is not in use.
1. Remove the battery pack from the
trimmer.
2. Put your trimmer on the ground and
carefully unfold the shaft. Make sure
that the cable is inside the shaft
so that it will not be pinched when
closing the joints (Fig. 1).
3. Use the M5 hex wrench to lock the
shaft with the two bolts supplied
(Fig. 2).
10
56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER
In order to avoid pinching your hands or fingers, do not hold the
Do not attempt to start the trimmer until the shaft has been locked.
Always remove the
QUANTITY
1
1
1
1
2
1
1
2