Publicité
Les langues disponibles
Les langues disponibles
WARNING:
when cleaning plastic parts. Most plastics are susceptible to damage from various
types of commercial solvents. Use clean clothes to remove dirt, dust, oil, grease, etc.
Tips for best trimming
results (Fig. 13)
◾
The correct angle for the cutting
attachment is parallel to the ground.
◾
This string trimmer allows you to
rest the bump knob on the ground
for more comfortable operation.
◾
Do not force the trimmer. Allow the
very tip of the line to do the cutting
(especially along walls). Cutting with
more than the tip will reduce cutting efficiency and may overload the motor.
◾
The cutting height is determined by the distance of the cutting line from the lawn
surface.
◾
Grass over 8 inches (200 mm) should be cut by working from top to the bottom in
small increments to avoid premature line wear or motor drag.
◾
Slowly move the trimmer into and out of the area being cut, maintaining the
cutting head position at the desired cutting height. This movement can be either
a forward-backward motion or a side-to-side motion. Cutting shorter lengths
produces best results.
◾
Trim only when grass and weeds are dry.
◾
Wire and picket fences can cause extra string wear or breakage. Stone and brick
walls, curbs, and wood may wear strings rapidly.
◾
Avoid trees and shrubs. Tree bark, wood moldings, siding, and fence posts can
easily be damaged by the strings.
20
56-VOLT LITHIUM-ION CORDLESS 15" BRUSHLESS STRING TRIMMER
Never use water for cleaning your trimmer. Avoid using solvents
13
Dangerous
cutting area
Direction of
rotation
Best cutting
area
Publicité
