Continental Fireplaces CHD4N Instructions D'installation Et D'utilisation page 47

10.4 BURNER REMOVAL
10.4.1 LOG BURNER REMOVAL (CHD4ST AND CHD4P ONLY)
Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.
A.
Carefully remove the logs and log support from the appliance.
B.
Remove the 4 screws securing the burner in place. Then slide the burner off the the orifi ce and remove
C.
from the appliance.
To reinstall the burner reverse these steps. NOTE: When reinstalling the burner ensure that the
D.
venturi rests on the orifi ce.
10.4.2 GLASS BURNER REMOVAL (CHD4STG AND CHD4PG ONLY)
Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.
A.
Vacuum the glass media out of the appliance. Ensure you insert a clean bag into your vacuum cleaner.
B.
Remove the 12 screws securing the media tray, then remove the media tray from the appliance, as
C.
shown below.
Remove the 4 screws securing the burner, as shown below. Then slide the burner off of the orifi ce and
D.
remove from the appliance.
To reinstall the burner reverse these steps. NOTE: When reinstalling the burner ensure that the
E.
venturi rests on the orifi ce.
D
D
C
47
EN
W415-1150 / 03.07.13