S+S Regeltechnik AERASGARD RLQ-CO2 Notice D'instruction page 17

G U
AERASGARD
TECHNICAL DATA
Bus protocol:
Baud rate:
Signal filtering:
Warm up time:
Response time:
Ambient temperature:
Permissible air humidity:
Electrical connection:
Housing:
Dimensions:
Mounting:
Protection class:
Protection type:
Standards:
Optional:
® RFTM - LQ - PS - CO2 - Modbus
Modbus (RTU mode), address range 0...247 selectable
9600, 19200, 38400 Baud
4 s / 32 s
approx. 1 hour
< 2 minutes
0...+50 °C / + 32...+ 122 °F
0...95 % RH (non-precipitating air)
0.2 - 1.5 mm 2 / 24 - 16 AWG, via push-in terminal
plastic, material ABS, colour pure white (similar to RAL 9010)
98 x 98 x 33 mm / 3.86 x 3.86 x 1.30 in (Baldur 2)
wall mounting or on in-wall flush box, Ø 55 mm / 1.97 in , base with 4 holes, for attachment
to vertically or horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for top/bottom cable entry for surface-mounted installation
III (according to EN 60 730)
IP 30 (according to EN 60 529)
CE conformity, electromagnetic compatibility according to EN 61 326,
EMC Directive 2014 ⁄ 30 ⁄ EU, Low Voltage Directive 2014 ⁄ 35 ⁄ EU
Display with illumination, 2-line, cutout approx. 36 x15 mm / 1.4 x 0.6 in (W x H),
to display actual humidity, actual temperature, air quality, of the fine-dust and CO2 content (cyclic)
or a selectable parameter (static)
or an individually programmable display value
17
Rev. Data - V32
(continued)