Bosch PAM20001 Mode D'emploi page 41

10 sec/
Programming the appliance stop time
Press the "Timer" key
cursor on the timer menu. The last function
programmed appears by default.
Use the "+" and "–" keys to select the
"Stop" function
Use the "down" key (see "up" and "down"
keys) to lower the cursor to the stop time
menu. Then use the "+" and "–" keys to
modify the stop time until the desired time is
reached.
The time changes 15 minutes at a time.
Instructions for Use
, to position the
, (see "+" and "–" keys).
Press the "Timer" key
seconds without touching any keys to
memorise the set stop time.
The set time is displayed on the screen.
10 sec/
Turning the timer off
Press the "Timer" key
cursor on the timer menu. The last function
programmed appears by default.
Use the "+" and "–" keys to select the "Off"
function.
Press the "Timer" key
seconds without touching any keys to turn
the timer off. No set time is displayed on the
screen.
41
, or wait for 10
, to position the
, or wait for 10