Bosch PAM20001 Mode D'emploi page 39

Press the "Ti m e r" key
time. If you do not press this key, the time is
automatically memorised when a period of 10
seconds has passed without pressing any key.
The screen returns to the main menu.
10 sec/
Programming the timer
The appliance needs to be turned on with the
clock set in order to programme the start /
stop times.
Press the "Timer" key
the timer menu. Press the "+" key to
programme the different functions available on
your appliance. These are:
• "Off" : appliance not programmed.
• "Start" : programming the appliance
start time.
• "Start/ Stop"
appliance start and stop time.
• "Stop" : programming the appliance .
Instructions for Use
, to memorise the
, to navigate through
: programming the
Programming the appliance start time
Press the "Ti m e r" key
cursor on the timer menu. The last function
programmed appears by default
Use the "+" and "–" keys to select the
"Start" function
Use the "down" key (see "up" and "down"
keys) to lower the cursor to the start time
menu. Then use the "+" and "–" keys to
modify the programmed time until the
desired time is reached.
The time changes 15 minutes at a time.
Press the "Timer" key
seconds without touching any keys to
memorise the set start time.
39
, to position the
, (see "+" and "–" keys).
, or wait for 10