VM Motori R756EU6C Manuel D'instructions page 84

ENGINE STORAGE
VM MOTORI STELLANTIS EUROPE
delivers the engine with a protection
treatment which is valid for 12 months
from the delivery date.
The correct management of the
engine storage time is governed by
the warranty conditions applied to the
engine.
ENGINE PROTECTION IN CASE OF LONG PERIODS OF INACTIVITY
It is recommended to contact the
personnel authorised by VM MOTORI
STELLANTIS EUROPE to carry out the
operations described below:
1) Protection against external
corrosion.
2) Protection against internal corrosion.
3) Engine packaging and storage.
1) PROTECTION AGAINST EXTERNAL CORROSION
The operations for protecting against
external corrosion must be carried out
with the engine off and cold.
- UNPAINTED SURFACES
Unpainted metal components and surfaces
(e.g. engine flywheel) must be protected
with "FL MECA FLUID / P118V" corrosion
protection oil.
- RUBBER COMPONENTS
Unpainted sleeves and pipes must be
protected with talcum powder. Check the
tightening of the relevant fixing clips in
advance.
- Protect the surfaces of the metal pulleys
with "FL MECA FLUID / P118V" spray.
English
– All packaging components of engine
storage must be disposed of in accordance
with the legislation in force in the country
where disposal takes place.
- ENGINE OPENINGS
Seal all the engine openings, including the
exhaust. Use cardboard, plywood or metal
covers, making sure they do not leave
behind any fragments of material.
All the engine openings - e.g. air intake
ducts or turbocharger air inlet - must be
protected with suitable covers capable of
preventing solid, liquid materials or dusts
from entering and delaying the evaporation
of the volatile substances of corrosion
protection agents. Apply plugs to the fuel
inlet and outlet pipes of the injection system.
- BATTERY CONNECTED TO THE
ENGINE
Respect the instructions of the manufacturer
of the vehicle in which the engine is
installed.
21
R756EU6C
GB
42432100F