VM Motori R756EU6C Manuel D'instructions page 83

R756EU6C
HANDLING AND LIFTING
Secure the engine with a lifting device
Fig. A
(lifting beam) of appropriate capacity.
GB
The angle formed by the lifting device
chains must not exceed 5°, as shown in
the figure A.
Hook the lifting device to the fixing points
as shown in the figure A.
Before carrying out the lifting, identify the
centre of gravity of the load.
MAX 5°
The brackets of the fixing points have
been dimensioned to lift the engine
only and are not type-approved to lift
any additional weight. Do not lift the
engine using a different procedure
from the prescribed one; otherwise, the
warranty for damages will be voided.
20 42432100F
English