Husqvarna TC 242TX Manuel D'utilisation page 11

Offset strut
Latch extension spring
Grass catcher presence lever
5/16 x 18 x 1.5" Carriage bolts
5/16 x 18 Lock nuts
Full lever shroud
10-24 x 1/2 Buttonhead screw
Cross brace
Grass catcher handle
Clevis pin
Clip
3/8 x 16 x 3/4 Screw
1923 - 006 - 14.07.2023
10-24 Nut
Front frame
Pivot
3/8 x 16 x 1" Nut
3/8 x 16 x 1" Carriage bolts
To assemble the grass catcher
1. Unfold the bag and put it right side up.
2. Remove the 2 screws and the 2 nuts (A) from the
front of the top frame.
A
3. Put the grass catcher on the side.
4. Push the ends (B) of the front frame (C) through
the loops in the fabric.
A
D
5. Push the 2 screws (A) through the fabric (D) and
the frames.
6. Install the 2 nuts.
C
B
C
E
11