WAGNER WallPerfect Flexio 687 E Mode D'emploi Original page 33

Flexio 687
With original WAGNER accessories and spare parts, you have the guarantee that all
safety regulations are fulfilled.
4. Description/ Scope of delivery
1) Air cap
3) Union nut
5) Trigger
7) Gun handle
9) Carry handle
11) Air hose
13) Cover of air filter compartment
15) Gun holder
17) Valve
19) Carrying belt
21) Stirring rod
23) Replacement nozzle seal (3 pcs.)*
25) Operatimg instructions
* This is inside the container: remove it before starting operations!
5. Field of application
Many different coating substances can be processed with the Flexio 687.
A different spray attachment must be used, depending on the coating substance:
Coating Materials
Low-viscosity coating substances:
Water- and solvent-based paints, finishes,
primers, 2-component paints, clear
finishes, automotive finishes, staining
sealers and wood sealer-preservatives.
All coating materials with the red Perfect
Spray logo
Interior wall paint (dispersions and latex
paint)
All coating materials with the green
Perfect Spray logo
Description/ Scope of delivery (Fig. 1)
2) Tip
4) Perfect Spray spray attachment
6) Material volume regulation
8) ON/OFF switch
10) Air volume control
12) Power cable
14) Air filter
16) Container (800 ml)
18) Ventilating hose
20) WallPerfect I-Spray spray attachment
22) Feed hopper (2 pcs.)
24) Practice poster
26) Lubricating grease (without illustration)*
Spray attachment
Perfect Spray (anthracite)
WallPerfect (white)
GB
25