Publicité
Les langues disponibles
Les langues disponibles
To display Radio Data System text data
This system can show the text data transmitted by the
Radio Data System available in some areas.
Press [DISPLAY] repeatedly.
"PS":
Programme service
"PTY":
Programme type
"FREQ": Frequency
Note:
• Radio Data System is available only when stereo works in
reception.
• Radio Data System may not be available if reception is
poor.
DAB/DAB+
Preparation
Press [RADIO, EXT-IN] repeatedly to select "DAB+".
If you select "DAB+" for the first time, the system will
start the "DAB AUTO SCAN" procedure.
Note:
• If no station is detected, "SCAN FAILED" is shown.
Adjust the antenna and try again.
DAB/DAB+ auto scan
1
Press [RADIO MENU] to select "AUTO SCAN"
and then press [OK].
"START?" is shown.
2
Press [OK].
"DAB AUTO SCAN" is shown.
DAB/DAB+ manual tuning
To find the best antenna position, use manual tuning to
search selected DAB/DAB+ frequency block.
1
Press [RADIO MENU] repeatedly to select
"MANUAL SCAN".
2
Press [2, 1] to select a frequency block to scan
and then press [OK].
"TUNING" is shown.
If "SCAN FAILED" is still displayed, repeat steps 1 to
2 until a station is stored. If the situation does not
improve, use an outdoor DAB antenna or consult
your dealer.
Memory presetting
You can preset up to 20 DAB/DAB+ stations.
1
Press [6] or [5] to select a station.
• Alternatively, press [:/6] or [5/9] on the
main unit when "STATION" is selected as the tune
mode*
1
.
2
Press [PGM, -DEL].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
Note:
• A station previously stored is overwritten when another
station is stored in the same preset number.
• You cannot preset a station when the station is not
broadcasting or when you have selected a secondary
service.
• Previous station memory is cleared during auto scan.
Selecting a preset station
Press the numeric buttons, [:] or [9] to select
the preset station.
• Alternatively, press [:/6] or [5/9] on the main
unit when "PRESET" is selected as the tune mode*
*1: To change the tune mode
1 Press [RADIO MENU] repeatedly to select "TUNE
MODE".
2 Press [2, 1] to select "STATION" or "PRESET", and
then press [OK].
Viewing available information
You can view information about the DAB/DAB+
broadcast, programme type, ensemble label and
frequency.
Press [DISPLAY] to view available information.
DAB/DAB+ settings
1
Press [RADIO MENU] repeatedly to select an
option.
2
Press [2, 1] to select the desired setting and
then press [OK].
DAB SECONDARY
PRIMARY
To listen to primary service.
SECONDARY To listen to secondary services.
"
" is shown.
AUTO CLOCK ADJ
ON ADJUST
Start auto clock adjustment.
OFF ADJUST Cancel auto clock adjustment.
DAB/DAB+ signal quality
When adjusting the antenna, you can check the
reception quality.
1
Press [RADIO MENU] repeatedly to select
"SIGNAL QUALITY".
2
Press [2, 1] to select frequency.
The current frequency block is displayed and then
the reception quality is indicated.
Reception quality
0 (poor) to 8 (excellent)
1
.
11
11
Publicité
