CombiSteel 7178.2100 Manuel D'utilisation Et De Maintenance page 5

8. Electrical products; the main control panel which provides the electricity to the product
without proper grounding installation, and the leakage current relay should not be
operated without installing the insurance groups.
9. In order to use the products they purchase, the product users are obliged to provide a safe
working environment by first fully completing the job security laws, regulations and
regulations.
DIGITAL THERMOSTAT USER MANUAL
Displays setting values; approve values in programming mode
(UP) Displays the measured maximum temperature, in programming mode
to change parameters and to raise values.
(DOWN) Displays the measured minimum temperature, in programming mode
change parameters and lower values.
It turns the device on and off.
KEY COMBINATIONS:
+ Locks the keypad and unlocks the keypad.
SET + Enables switching to programming mode.
SET + Provides output from programming mode.
SEE MINIMUM TEMPERATURE:
1 - Press the DOWN key
2 - The message "lo" is displayed first, followed by the minimum temperature value.
After waiting 3-5 seconds, the display returns to normal display.
SEE MAXIMUM TEMPERATURE:
1 - Press UP
2 - After the "hi" message, the maximum temperature is displayed on the screen
After waiting 3-5 seconds, the display returns to normal display.
RESERVATION OF SAVED TEMPERATURES:
While pressing the SET key for more than 3 seconds and the maximum or minimum
temperature is displayed, the "rST" message flashes and the normal temperature is displayed
again.
DISPLAY AND ADJUSTMENT OF SETTING VALUES:
Press and hold the SET key for 2 seconds to display the set values and
The unit flashes in °C.
You can set the values with the UP and DOWN keys and then confirm by pressing the SET
key.
5