Assembly Procedure - BMC timemachine Mode D'emploi

Assembly procedure

- Apply friction paste on the contact surface of the fork (1).
- Install first the angled spacer, using 16mm M6 bolts. Torque 12 Nm (2).
- Install stem body with the desired length spacing (3).
Important: Each length spacing has a corresponding specific bolt length. Incorrect bolt length may result in damaged stem
and fork!
Spacer combination
No spacers
10mm spacer
20mm spacer
10 + 20 spacers
- Apply friction paste between stem and handlebars. Install handlebars and faceplate. The frontal bolts of the face plate should be
tightened until the face plate touches the stem body.
Length L
16mm
26mm
36mm
46mm
Building a timemachine
1
4 5
2
3