Télécharger Imprimer la page

Flow WCM420 Traduction Des Instructions D'origine page 39

Broyeur à végétaux thermique

Publicité

Les langues disponibles

Les langues disponibles

50. Spacer strip
51. Set screws
52. Lock nut
53. Belt tensioning screw
54. Lock nut
55. Engine/shredding unit connection screws
56. V-belt
57. Wing screw
58. Air filter
59. Spark plug connector
60. Spark plug
61. Bearings
62. Grease nipple
63. Safety chain
3. Scope of delivery (Fig. 3)
• 1x feed funnel rubber seal
• 1x ejector chamber rubber seal
• 12x M10x25 mm hexagonal bolt
• 4x M10x35 mm hexagonal bolt
• 4x M10x30 mm hexagonal bolt
• 2x M10x70 mm hexagonal bolt
• 1x M10x80 mm hexagonal bolt
• 23x 10.5 mm spring washer
• 23x 10.5 mm washer
• 19x M10 locknut
• 1x Spark plug wrench
• 1x operating manual for petrol blade shredder
• 1x engine operating manual
• 2x ignition keys
4. Proper use
The device is suitable for private use around the home
and hobby garden. A device for private gardens and al-
lotments refers to a device with an annual operating time
generally not exceeding 50 hours, during which time the
device is primarily used to shred organic household and
garden waste. Public facilities, sporting halls, and agri-
cultural/forestry applications are excluded.
The device may only be used in the intended manner.
Any use beyond this is improper.
Proper use includes shredding
• All types of branches up to a maximum diameter of
120 mm (depending on the type of wood and fresh-
ness),
• Hedges and tree cuttings,
• Shrubs and bushes,
• Wilting, moist, garden waste that has already been
stored for several days, alternating with branches
The user/operator, not the manufacturer, is responsible
for damages or injuries of any type resulting from this. An
element of the intended use is also the observance of the
safety instructions, as well as the assembly instructions
and operating information in the operating manual.
Persons who operate and maintain the device must be
familiar with the manual and must be informed about
potential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the device.
The device may only be operated with original parts
and original accessories from the manufacturer.
Please note that our equipment was not designed with
(A)
the intention of use for commercial or industrial purpos-
(B)
es. We assume no guarantee if the device is used in
(C)
commercial or industrial applications, or for equivalent
(D)
work.
(E)
(F)
m Attention: The unit does not have road approv-
al and is therefore not intended for use on public
(G)
(H)
roads. It may only be used on cordoned off prem-
(I)
ises that are fenced in, attached to a vehicle and
moved using it.
(J)
(K)
5. Safety instructions
(L)
(M)
(33)
We have marked points in this operating manual that
impact your safety with this symbol. m
Furthermore, the operating manual contains other
important text sections that are marked with the word
"ATTENTION!".
m Attention!
When using equipment, several safety warnings must be
observed to prevent injuries and damage. For this rea-
son, please carefully read this operating manual / safety
instructions. If you hand the device over to another
person, please hand over this operating manual / safety
instructions as well. We accept no liability for accidents
or damage that occur due to a failure to observe this
manual and the safety instructions.
GB | 39

Publicité

loading

Ce manuel est également adapté pour:

39044159971