Publicité
Les langues disponibles
Les langues disponibles
Positioning
Position the appliance away from sources of heat such as stoves, radiators,
direct sunlight etc. Maximum performance and safety are guaranteed by
maintaining the correct indoor temperature for the class of unit concerned, as
specified on the rating plate.
Climate classification
Appliances must not be exposed to rain. Sufficient air must be allowed to
circulate in the lower rear section of appliances, as poor air circulation can
affect performance. Built-in appliances should be positioned away from heat
sources such as heaters and direct sunlight.
Reversing the door
The side at which the door opens can be changed from the right side (as supplied) to
the left side, if the installation site requires.
Before you start lay the
base,you should rest it on soft foam packaging or similar material to avoid damaging
the cooling pipes at the rear of the
1. Stand the refrigerator, use a flat bladed screw driver to remove the 2 screw
covers at the rear of the
2. Unscrew and lift the lid from the rear and remove it. Put it in a safe place.
This application perform well from
Ambient temperature
SN
N
ST
T
refrigerator
on it's back in order to gain access to the
refrigerator.
refrigerator
lid.
10~32℃
16 ~32℃
18~38℃
18~43℃
6
N to
ST.
Publicité
