Uline H-11242 Mode D'emploi page 8

4. Attach half leg bottom trim (10) to the bottom edge of
the half leg panels using eight M6 x 25 mm bolts (G).
Install three adjustable glides (K) into the half leg
bottom trim. (See Figure 18)
NOTE: If assembling a left-hand configuration,
side panel (6) will be on the right side when
assembled panels are placed upside down.
Figure 18
10
6
5. Flip the half leg onto adjustable glides. Install half
leg top trim (9) using eight M6 x 25 mm bolts (G).
(See Figure 19)
Figure 19
7
6
8
PAGE 8 OF 45
K
7
8
10
G
9
G
L-DESK ASSEMBLY
6. Remove all drawers from both pedestal files (4,15).
(See Figure 20)
drawer slides. Press down on the left tab while
Figure 20
7. Install two cam lock pins (B) into the inner panel of the
2-drawer pedestal file (4) and inner side panel (8) on
the half leg. (See Figure 21)
3-drawer pedestal file will be used.
Figure 21
9
6
NOTE: To remove drawers, locate tabs on
pulling up on the right tab and pull out drawer
body from cabinet.
4
NOTE: If assembling left-hand L-Desk,
4
B
15
8
1223 IH-11242