Uline H-11242 Mode D'emploi page 3

5. With a second person, connect laminate modesty
panel (2) in between the pedestal files (4,5). Tighten
cam locks (C). (See Figure 5)
NOTE: Cam lock caps (E) can be applied once
cam locks are tightened for a finished look.
NOTE: 2-drawer pedestal file will be on the left
side of laminate modesty panel. 3-drawer will
be on the right side.
Figure 5
4
6. Attach modesty panel trim (3) to top edge of
laminate modesty panel (2) using three
M6 x 25 mm bolts (G). (See Figure 6)
Figure 6
3
4
PAGE 3 OF 45
DESK ASSEMBLY CONTINUED
5
2
B
2
D
C
E
5
5
3
G
2
7. Remove all drawers from both pedestal files (4,5).
(See Figure 7)
NOTE: To remove drawers, fully open drawer
and locate tabs on drawer slides. While pressing
down on the left tab and pulling up on the
right tab, pull out drawer body from cabinet.
Figure 7
8. With a second person, place desktop (1) upside
down with pre-threaded holes facing up. Install four
shoulder bolts (L) into black pre-threaded holes.
(See Figure 8)
Figure 8
1
L
1
1223 IH-11242