Uline H-11242 Mode D'emploi page 11

Position assembled components in desired
location.
15. With a second person, connect return modesty panel
(12) to the side panel (6) on half leg using two
double-end cam lock pins (P) and four cam locks (C).
(See Figure 30)
Figure 30
6
C
16. With a second person, place desktop (1) upside
down. Pre-threaded holes in desktop should be
facing up. Install two shoulder bolts (L) into the
black pre-threaded holes on right side of desktop.
(See Figure 31)
NOTE: If assembling left-hand configuration,
install shoulder bolts (L) on left side of upside
down dektop (1).
Figure 31
PAGE 11 OF 45
L-DESK ASSEMBLY CONTINUED
6
12
P
12
1
L
1
17. With a second person, lift desktop (1) and carefully
align shoulder bolts (L) with slotted brackets in
2-drawer pedestal file (4). Lower desktop onto
assembled desk frame. (See Figure 32)
Figure 32
1
4
L
4
1223 IH-11242