Télécharger Imprimer la page

Grundig GKPN66940LXPW Manuel D'utilisation page 24

Masquer les pouces Voir aussi pour GKPN66940LXPW:

Publicité

Les langues disponibles

Les langues disponibles

Temperature on the product surface.
• High temperature may be observed
between two doors, on the side panels
and on the rear grill area while your
product is operated. This is normal and it
does not require servicing.
DISCLAIMER / WARNING
Some (simple) failures can be adequately
handled by the end-user without any safety
issue or unsafe use arising, provided that
they are carried out within the limits and in
accordance with the following instructions
(see the "Self-Repair" section).
Therefore, unless otherwise authorized in
the "Self-Repair" section below, repairs
shall be addressed to registered profes-
sional repairers in order to avoid safety is-
sues. A registered Professional repairer is a
professional repairer that has been granted
access to the instructions and spare parts
list of this product by the manufacturer ac-
cording to the methods described in legis-
lative acts pursuant to Directive 2009/125/
EC.
However, only the service agent (i.e.au-
thorized professional repairers) that you
can reach through the phone number
given in the user manual/warranty card
or through your authorized dealer may
provide service under the guarantee
terms. Therefore, please be advised that
repairs by professional repairers (who
are not authorized by) Grundig shall void
the guarantee.
Self-Repair
Self-repair can be done by the end-user
with regard to the following spare
parts:door handles,door hinges, trays, bas-
kets and door gaskets (an updated list is
also available support.grundig.com as of
1st March 2021).
Fan continues to operate when the door
is opened.
• Fan may continue to operate when the
freezer door is open.
WARNING: If the problem persists
after following the instructions in
this section, contact your vendor or
an Authorized Service. Do not try to
repair the product. This is normal.
Moreover, to ensure product safety and to
prevent risk of serious injury, the mentioned
self-repair shall be done following the in-
structions in the user manual for selfrepair
or which are available in sup-
port.grundig.com . For your safety, unplug
the product before attempting any self-re-
pair.
Repair and repair attempts by end-users for
parts not included in such list and/or not
following the instructions in the user manu-
als for self-repair or which are available in
support.grundig.com, might give raise to
safety issues not attributable to Grundig,
and will void the warranty of the product.
Therefore, it is highly recommended that
end-users refrain from the attempt to carry
out repairs falling outside the mentioned
list of spare parts, contacting in such cases
authorized professional repairers or re-
gistered professional repairers. On the con-
trary, such attempts by end-users may
cause safety issues and damage the
product and subsequently cause fire, flood,
electrocution and serious personal injury to
occur.
By way of example, but not limited to,the
following repairs must be addressed to au-
thorized professional repairers or re-
gistered professional repairers:compressor,
cooling circuit, main board,inverter board,
display board, etc.
The manufacturer/seller cannot be held li-
able in any case where end-users do not
comply with the above.
EN / 24

Publicité

loading

Ce manuel est également adapté pour:

Glpn 66820 x