haacon S 2000 Plus S/L Manuel D'utilisation Et D'entretien page 13

Servicing instructions
Servicing work
Conduct a visual inspection of the
support device for signs of cracks
an deformation
Grease spindle and spindle nut
Professional inspection accord-
ing to DGUV-V 54
The spindle support device must be checked by an expert at least during
the normal vehicle inspection routine, particularly for stiffness. If neces-
sary wear parts are to be replaced. The spindle support device is filled
with durable grease. It must not be connected to the central lubrication
system.
There is a grease nipple on the external tube to grease the spindle.
Depending on the frequency of use and the requirements placed on
the device, the spindle must be greased at regular intervals, at least
biannual.
To do this extend the spindle support device as far as possible and
retract it again as you lubricate it.
If you replace gear parts, spindles or nuts, you must grease the device.
Servicing interval
Each time you use the support
device. Repair the support device
immediately if it is damaged.
biannual
Every year
Lubrication schedule
Item Lubricant
Rhenus LFC 2
1, 2, 3
or
KP 2 K-30
4 + 5
Activity
Fill the thread flanks item 1
Grease the bearings
Fill with grease, 250 - 300 g each
– 13 –
GB