Publicité
Les langues disponibles
Les langues disponibles
3. On the top of the appliance, place the upper bracket
and secure with 3 screws provided.
4. Tighten the side brackets' screws adjusting them so
all three brackets are flush with each other.
5. Install the hanging brackets provided with the front
on the top corners of the appliance, using 2 screws
per bracket provided with the trim.
Hanging
bracket—
detail
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.
Designed and Manufactured by / for Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valorfi replaces.com
6. Hang the front (Clearview or Edgemont) to the
hanging brackets.
GE4ED Edgemont Front shown:
2 hooks at top, 2 magnets at bottom
3
Publicité
