Publicité
Les langues disponibles
Les langues disponibles
The GE4SK1 installs on the GE4 electric fireplace to
accomodate either the GE4CFV Clearview Front or the
GE4ED Edgemont Front.
The front is secured to the shroud assembly by hooks
at the top and magnets at the bottom. The shroud
assembly requires the installation of hanging brackets
—supplied with the front—on its upper corners.
Description
GE4SK1 Shroud Kit
Upper Bracket
Side Brackets (2)
*#8x1/2" low profi le black screws (7)
GE4CFV Clearview Front
RS Hanging Bracket
LS Hanging Bracket
GE4EDPW Edgemont Front
RS Hanging Bracket
LS Hanging Bracket
*Screws to secure hanging brackets supplied with GE4SK1
Installation
1. On each side of the appliance, loosen two screws
indicated below: from the top, 2nd screw closest to
the front edge of appliance; from the bottom, screw
that is closest to the front.
2. Slide one of the side brackets under the screws
using the upper slots. Do not tighten the screws yet.
Repeat with the other side of the appliance.
Appliance's right side view
2
GE4SK1 Shroud Kit
Part
number
4011465
4011466
GE4CFV
4004560
Clearview Front
(see separate instructions)
4011473
4011462
4011512
4011515
Overview—GE4 Fireplace with GE4SK1 Shroud Kit & GE4CFV
Clearview Front or GE4ED Edgemont Front (sold separately)
GE4 Electric Fireplace
GE4ED
Edgemont Front
(see separate instructions)
Publicité
