Publicité
Les langues disponibles
Les langues disponibles
Under no circumstances use sharp objects to scrape off frost or
electric heating appliances (hair dryers, radiators). The device
could be irreparably damaged.
•
After the frost melts, wipe and dry the freezer thoroughly.
•
Plug it back in and wait an hour or two before filling it again.
CLEANING
Before cleaning, unplug the appliance. Never use abrasive
products or a sponge with a scraper to clean the interior or
exterior of your device.
•
Remove all accessories (shelves, balconies, vegetable
drawers). Wash them in lukewarm water with a mild, odorless
detergent
(dishwashing detergent, for example), rinse with bleach and dry
thoroughly.
•
Wash the interior walls in the same way; take particular
care of the shelf supports
•
Wash the door seal, remembering to also clean under the seal.
•
Plug the device back in.
Clean the freezer each time you defrost. From time to time, dust the
condenser at the back of the unit; An accumulation of dust could
reduce the performance of the device.
In case of prolonged absence, empty and clean the device; keep the
door ajar during the period of non-use.
2. Bulb replacement
As the LED bulb is soldered to the electronic circuit, please call after-
sales service or a specialized technician if changing the bulb is
necessary.
EN-37
Publicité
