Publicité
Les langues disponibles
Les langues disponibles
Location
- Place your device far from a heat
source (heater, cooking appliances,
direct
sunlight).
functioning of your device, the ambient
temperature of the room must be
between +16°C and +38°C (class ST).
Outside of these limits; the device will no
longer operate normally.
- Please leave enough space at the back and sides of the device to
ensure good air circulation. Insufficient ventilation will lead to poor
operation and increased energy consumption.
- Level the device by correctly adjusting the 2 feet.
IMPORTANT : The installation of this device requires the intervention of
2 people.
Connection to the network
Your device is designed to operate under a single-phase voltage of
230 volts.
It must be connected to a wall socket connected to earth and
protected by a 10 A fuse in accordance with standard NF C15-100
and the instructions of your electricity supplier.
IMPORTANT :
This devicemust be installed so that the power outlet remains
accessible. Make sure after installing it that it is not resting on the
power cable.
IV. FACILITY
For
the
proper
EN-24
Publicité
