Publicité
Les langues disponibles
Les langues disponibles
III.
a. TRANSPORT AND START-UP
When transporting this device. take it by the base and gently tilt it up to a
maximum of 45°. Do not lift the appliance by the door handle. Do not
place the device in a completely horizontal position or upside down.
Push the refrigerator on the rolling feet to move it.
Attention : After transporting the refrigerator, you must wait at least 8
hours before putting it into service.
IMPORTANT: The installation of this device requires the intervention of
several people.
b. UNPACKING THE APPLIANCE AND DISPOSING OF PACKAGING
ELEMENTS
• Remove all packaging elements around the device, as well as the
protective elements located inside the device compartments.
• The packaging cardboard and sheets of paper are recyclable. They
must be thrown into the collection bins provided for this purpose.
• Other packaging elements (adhesive, ties, etc.) must be thrown
away with household waste.
To find out more : www.quefairedemesdechets.fr
c. CLEANING THE APPLIANCE:
Clean all refrigerator components with water and a mild detergent
solution. Rinse it thoroughly and dry it with a soft cloth.
Note: The electrical parts of the device can only be cleaned with
a dry cloth.
BEFORE THE FIRST USE
EN-23
Publicité
