i-tec CATRIPLEDOCKVGAPD Mode D'emploi page 7

Resolution:
1 monitor - 1x HDMI 1 to 4K/60Hz*
1 monitor - 1x HDMI 2 to 4K/30Hz
1 monitor - 1x VGA up to 1080p/60Hz
2 monitors - HDMI 1 + HDMI 2 up to 4K/60Hz* + 4K/30Hz
2 monitors - HDMI 1 + VGA up to 4K/60Hz + 1080p/60Hz
2 monitors - HDMI 2 + VGA up to 4K/30Hz + 1080p/60Hz
3 monitors - HDMI 1 + HDMI 2 + VGA up to 4K/60Hz* + 4K/30Hz + 1080p/60Hz
* Devices with a free USB4, USB-C port with "DisplayPort Alternate Mode" support
or Thunderbolt™ 3/4 port
* Notebook must support DisplayPort 1.4 standard. If DisplayPort 1.2 is supported,
the maximum possible resolution is up to 4K/30Hz.
SYSTEM REQUIREMENTS
Hardware Requirements:Device with a free USB-A, USB-C, USB4 or Thunderbolt™ 3/4 port
Operating System: Windows 10/11, macOS, Android with latest updates
DRIVER INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10 (32/64 BIT VERSIONS)
WARNING! Do not connect the docking station to your laptop/tablet until you have
installed the appropriate drivers. The drivers only need to be installed before first
use. Make sure you have the latest drivers for your device and an updated BIOS
installed on your system before installation.
For Windows 7 / 8 / 8.1, download the drivers from our website www.i-tec.cz under
the "Download" tab for this product. Start the installation from the downloaded file,
select the installation language and follow the on-screen instructions.
In Windows 10, the dock can be connected directly, and the drivers are automatically
installed from the system when connected to the internet.
On Windows 7 / 8 / 8.1 / 10, install the drivers as the "Administrator" user. The screen
may flicker during driver installation, this is a standard process. We recommend re-
starting your laptop/tablet after the installation is complete.
Quick Start / USB 3.0/USB-C/Thunderbolt, 3x Display Docking Station / English
EN | 7