Declaration Of Conformity - Bosch IXO Notice Originale

OBJ_DOKU-41216-001.fm Page 32 Thursday, October 16, 2014 4:54 PM
32 | English
may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into ac-
count the times when the tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator from the effects
of vibration such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product described under
"Technical data" is in conformity with all relevant provisions of the directives
2009/125/EC (Regulation 1194/2012), 2011/65/EU, 2014/35/EU,
2014/30/EU, 2006/42/EC. including their amendments and complies with
the following standards: EN 60745-1, EN 60745-2-2 (battery powered
product), EN 60335-1, EN 60335-2-29 (battery charger).
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
15.10.2014
Assembly
 Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
1 609 92A 0W7 | (16.10.14)
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools