Noise/Vibration Information; Declaration Of Conformity; Battery Charging - Bosch GDR 14,4 V-LI Professional Notice Originale

OBJ_BUCH-832-003.book Page 15 Monday, January 16, 2012 3:04 PM
Cordless Impact Screwdriver
Bolt size
Tool holder
Weight according to EPTA-Procedure
01/2003
Cordless Impact Screwdriver
Article number
with battery
Rated voltage
No-load speed
Impact rate
Maximum torque, hard screwdriving
application according to ISO 5393
– ¼" hexagon socket
– ½"
Bolt size
Tool holder
Weight according to EPTA-Procedure
01/2003
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 96 dB(A); Sound power level
107 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
Impact tightening of fasteners of the maximum capacity of the
2 2
tool: a =12 m/s , K=1.5 m/s .
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Bosch Power Tools
GDS 14,4 V-LI
Professional
mm M6 – M16
½"
kg 1.6
GDX 14,4 V-LI
Professional
3 601 JB8 0.. 3 601 JB8 0..
"premium"
V= 14.4
-1
min 0 –2800
-1
min 0 –3200
Nm 150
Nm 170
mm M6 – M16
¼" hexagon ¼" hexagon
socket/ ½" socket/ ½"
kg 1.7

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
07.12.2011
Assembly

Battery Charging

Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium ion battery of your power tool.
Note: The battery is supplied partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
GDS 18 V-LI
Professional
M6 – M16 M6 – M16
½" ½"
1.4 1.7
GDX 18 V-LI
Professional
3 601 JB8 1..
"compact" "premium"
14.4 18
0 –2800 0 –2800
0 –3200 0 –3200
150 160
170 180
M6 – M16 M6 – M16
¼" hexagon
socket/ ½"
1.5 1.8
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
2 609 140 904 | (16.1.12)
English | 15
M6 – M16
½"
1.5
3 601 JB8 1..
"compact"
18
0 –2800
0 –3200
160
180
M6 – M16
¼" hexagon
socket/ ½"
1.6