Publicité
Les langues disponibles
Les langues disponibles
Use the Remote Controller
Forward
button
Reverse
button
Speed select button
Attach the batteries of controller
Lift the battery compartment door on the back of the controller and
insert two AAA(LRO3) batteries.
HINT: Batteries not included. Refer to the Battery Information.
1. Build connection
Long press the forward and reverse buttons for 3 seconds, and the
speed indicator flashes. Then power on the vehicle, the speed
indicator goes to long bright, means the connection is successful. If
the speed indicator has no response, means the connection is failed.
Replace the batteries and retry.
2. Brake button
Press the button to stop the vehicle, press it again to release the
brake.
3. Speed select button
The switch operates the vehicle to move in low, normal or high speed.
HINT: This switch won't work while your vehicle moves reverse.
NOTE:
●Leave the remote controller idling for about 10 seconds, it will shut
down automatically.
●Rebuild connection when you replace the batteries of the remote
controller.
16
Speed indicator
Brake
button
Right
button
Left button
Publicité
