Kerbl FMC-IP1 Mode D'emploi page 28

5.2 Android configuration
Install the "AnyScene" app from the Google Play Store.
Open the app.
Press Click here to add camera and enter the UID and
Password/Security Code (located on the camera cable
label) as well as the Name
(the default password is "admin")
You can also enter the UID by scanning the QR code on
the cable label. To do so, press Scan.
AnyScene uses the "Barcode Scanner" app for the
scan function. If this app is not yet installed, AnyScene
will attempt to install it after you press the Scan button.
Confirm the warning message with OK and follow the
instructions on the screen or install the app manually
from the Google Play Store.
You can now scan the QR code on the UID label on your
IP StableCam.
Then click on OK.
The app now connects to the camera.
Finished!
Functions
Snapshot
Sound
Album
1081=BA_IP_StableCam.indd 29
AnyScene
29
06.11.2013 14:36:43