Kerbl FMC-IP1 Mode D'emploi page 26

Now click on Enter to start the video stream.
You are now prompted to enter the access data. The follo-
wing are set by default:
User name: admin
Password: admin
When accessing via the browser for the first time, please
allow Windows and/or your browser to install an ActiveX
control. To proceed, click on Install or Allow.
Now you can receive the video stream from your camera.
4. Viewing via Camera Live on PC
Open the Camera Live program.
Camera MultiLive
Overview of all Multiple
cameras cameras simul-
taneously
Click on Camera and then on Add Video to add a new
camera.
Now enter the UID, Password and Name of the camera
(the UID and password are located on a label on the ca-
mera cable).
Check the camera status. If it is not online, wait a few
seconds. Then select the camera and double-click on the
set camera and watch the video signal.
1081=BA_IP_StableCam.indd 27
Video Album
Recorded Snapshots
videos
27
IP StableCam
06.11.2013 14:36:19