Kerbl FMC-IP1 Mode D'emploi page 24

Camera
Lens / Image sensor:
Pixels:
Viewing angle:
Min. illumination:
Infrared LEDs:
Night vision distance:
IR filter:
Protection class:
SD card support:
Max Temperature:
CE Mark / CE Declaration of Conformity
Albert KERBL GmbH hereby declares that the product / device described in these instructions complies with the fundamental require-
ments and other relevant stipulations of Directive 2004/108/EC, 2006/95/EC and 1999/5/EC. The CE mark confirms compliance with the Directives
of the European Union. The declaration of conformity can be viewed by visiting http://www.kerbl.de.
Warranty card
Based on our General Terms and Conditions of Business, we offer a 1 YEAR WARRANTY for this device covering damage caused by material or
manufacturing defects. This warranty begins on the date of purchase.
The warranty does not cover:
1. damaged caused by natural wear and tear (wear parts, sliding parts), excessive strain and incorrect use (non-compliance with operating
instructions).
2. Damage caused by force majeure or sustained during transport.
3. Damage to rubber parts, e.g. on connecting lines. Warranty repairs are only carried out by the manufacturing plant or an authorised con-
tracted workshop. The manufacturer reserves the right to reject any warranty claims in the event of non-compliance.
The device must for this purpose be returned to the point of sale, at the risk of the device owner, complete, packaged and with sufficient post-
age, including the original invoice and the warranty card. (address see dealer stamp). Please provide as much information as possible on the
nature of the problem. Costs incurred as a result of unjustified defect claims will be invoiced to the device's owner.
Electrical waste
It is up to the operator to dispose of the IP StableCam responsibly in accordance with local regulations. Consult the relevant
regulations for your country. The device must not be disposed of in household waste. Under the terms of the EU Directive on the
disposal of old electrical and electronic equipment, the device can be taken to local authority-run refuse sites or recycling plants
free of charge, or returned to dealers who offer a returns service. Correct disposal protects the environment and prevents any
possible harmful impacts on humans and the environment.
1081=BA_IP_StableCam.indd 25
1/4" CMOS
310,000
Horizontal 50 °,
Vertical 40 °
1.0 lux
(0 lux in night vision mode)
24
12 m
Yes
IP66
16 MB – 128 GB
45 °
PC system requirements
The PC and network must meet the following
technological specifications in order for the camera to
function.
Processor:
Intel Pentium III, 1GHz or higher
(Pentium IV, 2 GHz or higher recommended)
RAM:
256 MB or more
Colour monitor:
We recommend at least 800 x 600 and the latest
driver for the display adapter
Operating system:
Microsoft Windows 98 / Windows ME / Windows 2000 /
Windows XP / Windows Vista / Windows 7 / Windows 8
Web browser:
Internet Explorer Version 5.0 or higher, DirectX 9.0c or
higher, Safari, Firefox (requires QuickTime),
Google Chrome (requires QuickTime)
Network protocol:
TCP/IP network protocol installed
Interface:
10/100 Mbps Ethernet connection or
wireless network connection (WLAN)
Other:
CD-ROM drive
25
06.11.2013 14:36:06