Renkforce Leser 7 Notice D'emploi page 71

Command: Transponder number (T)
Command description: Is used for one-time reading of a transponder. If no transponder
is in the filed. the transponder reader returns „NOTAG". The transponder number is
indicated with 10 digits (e.g. AC3F00D1B4) as a hexadecimally encoded ASCII character
sequence.
Format: <STX><ADR>CT<CRC><EOT>
Example: <STX>FFCT23<EOT>
<STX>FFCT03C2208CFF64<EOT>
Reads the current transponder number 03C2208CFF.
71