Command Sub-Groups For „Command" (C) - Renkforce Leser 7 Notice D'emploi

e) Command Sub-Groups for „Command" (C)
Command: Relay (R)
Command description: Serves to switch the relay on or off.
Value 1 means: Relay on
Value 0 means: Relay off (example: Command „CR0")
Format: <STX><ADR>CR<DATA><CRC><EOT>
Example: <STX>FFCR152<EOT>
<STX>FFCR<ACK>27<EOT>
Switches on the relay.
<STX>FFCR051<EOT>
<STX>FFCR<ACK>27<EOT>
Switches off the relay.
Command: Head (H)
Command description: Serves to switch the reading head mode on or off.
Value 1 means: Mode = reading head
Value 0 means: Mode = Standalone (Example: „CH1")
Format: <STX><ADR>CR<DATA><CRC><EOT>
Example: <STX>FFCH148<EOT>
<STX>FFCH<ACK>1D<EOT>
Switches on reading head mode
<STX>FFCH047<EOT>
<STX>FFCH<ACK>1D<EOT>
Switches off reading head mode
70