Electrolux ENV9MD18S Notice D'utilisation page 20

20 www.electrolux.com
To remove the humidity control device:
1. Open the drawer below the glass
shelf and pull out the cover.
2. If you need to replace the device's
white membrane, grab the device in
the middle and separate the
membrane from the cover by pulling
the cover.
3. Assemble a new membrane into the
cover by pressing the edge of the
membrane into the cover.
4. Reassemble the humidity control
back on the drawer.
Depending on the quantity
and condition of fruit and
vegetables stored in the
GreenZone drawer,
condensation may occur.
In such a case, remove the
condensation using a soft
cloth.
5.8 MULTIFLOW
The refrigerator compartment is
equipped with the MULTIFLOW device
that allows for rapid and more effective
cooling of food and maintaining a more
uniform temperature in each part of the
refrigerator compartment.
This device activates automatically when
needed.