Electrolux ENV9MD18S Notice D'utilisation page 10

10 www.electrolux.com
4. CONTROL PANEL
ECOMETER indicator
1
Fridge compartment indicator
2
Alarm indicator
3
Door open alarm indicator
4
Freezer compartment indicator
5
Extra Cool button / indicator
6
Extra Freeze button / indicator
7
Connectivity button / indicator
8
Freezer temperature button /
9
indicator
APP indicator
10
Fridge temperature button / indicator
11
Meat & Fish button / indicator
12
Fruit & Veg button / indicator
13
ECO button
14
4.1 Switching on
Connect the mains plug to the power
socket.
To select a different set temperature,
refer to "Temperature regulation".
If
to "Troubleshooting".
4.2 Switching off
1. Press and hold the fridge
temperature button and freezer
temperature button simultaneously
for 5 seconds
The display shows blinking
2. Once the appliance is switched off,
the display reads
3. Disconnect the mains plug from the
power socket.
1
14 13 12
appears on the display, refer
.
.
2 3 4 5
11 10 9
4.3 Temperature regulation
The temperature range may vary
between -15°C and -24°C for freezer and
between 2°C and 8°C for fridge.
Press the temperature buttons to set the
temperature of the appliance.
The recommended set temperature is:
• +4°C for the fridge
• -18°C for the freezer
You may set the recommended
temperature manually with temperature
buttons or by switching on the ECO
function. Refer to "ECO function" for
more information
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure, the
appliance goes back to the
set temperature.
4.4 Switching off the fridge
It is possible to switch off only the fridge
compartment leaving the freezer
compartment on.
1. Press and hold the fridge
temperature button for 5 seconds.
The display shows blinking
2. Once the fridge compartment is
switched off, the display reads
4.5 Switching on the fridge
To switch on the fridge:
1. Press and hold the fridge
temperature button for 5 seconds.
The display shows blinking
6 7
8
.
.
.