Publicité
Les langues disponibles
Les langues disponibles
maintenance
EN
10.4 blower replacement
WARNING
!
• Risk of fire and electrical shock!
• Turn off the gas and electrical power before servicing this appliance.
• Use only Wolf Steel approved optional accessories and replacement parts with this appliance. Using
non-listed accessories (blowers, doors, louvres, trims, gas components, venting components, etc.) could
result in a safety hazard and will void the warranty and certification.
• Ensure that the fan's power cord is not in contact with any surface of the appliance to prevent electrical
shock or fire damage. Do not run the power cord beneath the appliance.
• The wire harness provided in the blower kit is a universal harness. When installed, ensure that any excess
wire is contained, prevent it from making contact with moving or hot objects.
A.
Turn off the power to the appliance.
B.
Remove the safety barrier.
C.
Remove the control panel (2 screws).
Unplug the blower from the control
D.
board.
E.
Undo the fastener at the left side
of the blower mounting plate. The
assembly should now slide to the left,
away from the mounting tab.
Disconnect the slip-on connectors at
F.
the motor of the blower.
G.
Replace the blower in assembly and
reverse previous steps.
H.
Ensure that there are no cables
touching the blower.
Drywall dust will penetrate into the blower bearings, causing
irreparable damage. Care must be taken to prevent drywall dust from coming into contact with the blower or its
compartment. Any damage resulting from this condition is not covered by the warranty policy.
50
W415-2026 / B / 04.27.23
NOTE: For ease of blower installation/
removal, control panel may need to be
removed.
SPECIFIC BLOWER INSTALLATION
INSTRUCTIONS MUST BE ADDED HERE.
THIS TEMPLATE MUST BE USED WITH ANY
APPLIANCE THAT OFFERS THE BLOWER AS
AN OPTION OR COMES STANDARD WITH THE
APPLIANCE... AS PER THE STANDARD.
Remove 1 screw
Slide left to
remove
Control Panel
(front view)
Some components
hidden for clarity.
35.1
Publicité
