Nakayama Pro EC1500 Mode D'emploi page 9

EN
2) The saw teeth should only be polished forward and unidirectionally. Ensure that the saw teeth do not contact the saw blade when retracting backwards.
Polish the shortest saw tooth first. The length of the saw tooth is used as the reference size of other saw teeth on the chain:
a) The circular blade must match the chain pitch.
b) The circular inner blade frustrates the head from the inside out.
c) Grind in one direction according to the angle of the cutter head.
d) Please maintain the angle of the cutting edge.
e) Depending on the depth of the guide plate groove, the small teeth of the cutter head are wrong. (See figure below)
f) If you have any questions, please contact the dealer.
PRECAUTIONS FOR BATTERY USE AND MAINTENANCE
• Do not charge in an area with temperatures lower than 0 ͦ C or higher than 45 ͦ C as this can damage the battery.
• Please ensure that the switch is in the off position before connecting the battery. Connecting the battery to the lithium chain saw when the switch is in the
on position can cause accidents.
• Only use the charger specified by the manufacturer to charge the battery. Charging the battery with a charger that does not match the battery may cause
fire and other hazards.
• When the battery is not in use, keep it away from paper clips, coins, keys, nails, screws and other small metal objects that can short-circuit the battery. Short-
circuiting the battery may cause burns or fire.
• It is forbidden to disassemble or reassemble the battery.
• Do not short-circuit the battery.
• It is forbidden to charge the battery near heat sources.
• It is forbidden to throw the battery into fire or water.
• It is forbidden to charge the battery near fire or under sunlight.
• It is forbidden to insert nails into the battery, hit or smash the battery in any way or throw it to the ground.
• It is forbidden to use seriously damaged or deformed batteries.
• Direct welding on the battery is prohibited.
• It is forbidden to charge the battery in reverse, reverse connection or over discharge.
• It is forbidden to connect the battery to a charging socket or a car's cigarette lighter socket.
RECHARGEABLE CHAIN SAW SAFETY WARNINGS
• When the chain saw is in operation, keep a certain distance between your body and the chain saw. Before starting the chain saw, make sure that the chain is
not in contact with anything. During operation of the chain saw, even the slightest distraction of the operator may cause clothing or body parts to be caught
in the chain.
• Always hold the rear handle of the chain saw with your right hand and the front handle of the chain saw with your left hand. Doing the opposite will increase
the risk of personal injury. Therefore, never grasp the rear handle with your left hand and grasp the front handle with your right hand.
• Because the chain may touch hidden wires, when operating the power tool only hold the insulated handle. When the chain comes into contact with a live
wire, the exposed metal parts of the tools may also be live and lead to the operator getting electrocuted.
• Please wear protective glasses and ear protection. It is recommended to also wear protective equipment to protect the head, hands, legs and feet. Protective
clothing will reduce the risk of personal injury caused by flying debris or accidentally touching the chain.
• Do not operate the chain saw on a tree. Operating the chain saw on a tree may cause personal injury.
• Make sure to stand firm and on a fixed, safe and level surface before operating the chain saw. Slippery or unstable surfaces such as ladders may cause the
operator to lose balance or lose control of the chain saw.
• When cutting a branch under tension, beware of rebound. When the tension on the wood fiber is released, the elastic force on the branch may impact the
operator, or the chain saw may cause it to lose control.
• When cutting shrubs and saplings, please be especially careful because slender materials may jam the chain and lead to injury.
• Before carrying the chain saw, turn it off and hold the front handle firmly. When transporting or storing the chain saw, be sure to close the guide cover.
Properly operating the chain saw will reduce the possibility of accidental contact with a running chain.
• Lubricate, tension the chain and replace accessories according to the instructions. Improperly tensioning or lubricating the chain may cause the chain to
break or increase the possibility of rebound.
9
WWW.NIKOLAOUTOOLS.GR