Publicité
Les langues disponibles
Les langues disponibles
28
www.aeg.com
How to deactivate the rinse
aid dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
to flash and the display is blank.
2. Press
• The indicators
• The indicator
flash.
• The display shows the current
setting.
3. Press
4. Press the on/off button to confirm
the setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
7. OPTIONS
,
and
.
and
continues to
–
= rinse aid dispenser
activated.
–
= rinse aid dispenser
deactivated.
to change the setting.
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
How to activate the acoustic
and
until
signal for the end of
start
programme
The appliance must be in programme
selection mode.
go off.
1. To enter the user mode, press and
2. Press
3. Press
4. Press the on/off button to confirm
7.1 Multitab
Activate this option when you use multi-
tablets that integrate the salt, rinse aid
and detergent functions. They can also
contain other cleaning or rinsing agents.
This option deactivates the release of
salt. The salt indicator does not come on.
With the use of this option the
programme duration is prolonged to
increase the cleaning and drying results
with the use of multi-tablets.
Multitab is not a permanent option and
must be selected at every cycle.
How to activate Multitab
Press
The related indicator comes on.
hold simultaneously
the indicators
,
to flash and the display is blank.
.
• The indicators
• The indicator
flash.
• The display shows the current
setting:
–
= Acoustic signal off.
–
= Acoustic signal on.
to change the setting.
the setting.
.
and
until
and
start
and
go off.
continues to
Publicité
