BH S3TiB Manuel Du Propriétaire page 18

STEP 3 (this step will require two people)
Connect the wire in the right upper end of the upright post with the wire from the bottom
right console tray bracket. Slide the left and right console tray brackets into the upright
posts. Align the holes in the console tray brackets with the upright post holes and secure
them with 6pcs of Screws (13).
TIP: If you are having trouble getting the console tray into the upright posts, make sure
that the screws at the bottom of the upright posts are loose. This gives some play in the
upright posts and you can seat the console tray more easily.
Console Tray
13
Left Upright Post Right Upright Post
18